BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Talks.cam//talks.cam.ac.uk//
X-WR-CALNAME:Talks.cam
BEGIN:VEVENT
SUMMARY:Science Makers: Water Monitoring (build a 3D-printed microscope)  
 - Speaker to be confirmed
DTSTART:20170805T110000Z
DTEND:20170805T160000Z
UID:TALK75671@talks.cam.ac.uk
CONTACT:Jennifer Molloy
DESCRIPTION:!https://secure.meetupstatic.com/photos/event/5/e/9/8/600_4633
 44216.jpeg!\n\nThis month Science Makers takes a look at DIY water monitor
 ing - a thriving area of grassroots and citizen science activity. Join us 
 to build a microscope and Arduino-based sensors then investigate some samp
 les from the River Cam!\n\nScience Makers is a monthly event to discuss an
 d build low-cost\, DIY and open hardware for science and education. All ar
 e welcome for the talks\, making or both!\n\n*Talks*\n\nDr Wouter Buytaert
  is a senior lecturer in water resources and environmental change in the D
 epartment of Civil and Environmental Engineering. Wouter has published sev
 eral papers on citizen science and can give an overview of exciting projec
 ts in the field.\n\nAlex Patto is a founder of the social enterprise Water
 Scope and is researching the application of low-cost\, 3D-printed microsco
 pes in water testing and education. He will introduce their 3D printed mic
 roscope designs plans and the story of WaterScope. \n\n*Making*\n\nIf you 
 would like to take a WaterScope home with you\, please email jcm80@cam.ac.
 uk and let us know. You will need to bring £50 for the kit + camera and b
 uy your own Rapberry Pi!\n\n• Build a WaterScope - a 3D-printed microsco
 pe using a Raspberry Pi camera.\n\n• Build DIY sensors\, spectrometers\,
  colorimeters and more\n\n• Collect some samples from the Cam to test.\n
 \n*Timings *\n\n12:00 - Arrival and introductions\n\n12:15 - Talks and dis
 cussion\n\n13:30 - Pizza \n\n14:00 - Making!\n\n!https://secure.meetupstat
 ic.com/photos/event/5/e/4/3/600_463344131.jpeg!\n
LOCATION:Makespace Classroom\, 16 Mill Lane\, Cambridge\, CB2 1RX 
END:VEVENT
END:VCALENDAR